The packaging for the A1 mini combo has been changed, so the arrangement of the packaging materials may be slightly different from what is described in this text. In case of any discrepancies, you can refer to the unboxing video for guidance on the proper
¶ Printer
¶ Step 1: Power off, disconnect the power cable and remove the filament from AMS lite
 |
 |
 |
 |
¶ Step 2: Remove PFTE tubes from AMS lite and A1 mini
 |
 |
 |
 |
¶ Step 3: Remove the build plate, spool holder and purge wiper
 |
 |
 |
 |
¶ Step 4: Loosen the heatbed screws two rounds
 |
 |
¶ Step 5: Place the foam to secure the heatbed and tool head
 |
 |
 |
|
¶ Step 6: Install the Z-axis limiter
 |
 |
 |
 |
¶ Step 7: Secure the tool head with zip-tie
 |
 |
¶ AMS lite
¶ Step 1: Pull out the rotary spool holders
 |
 |
¶ Step 2: Remove the 4*BT3-6 screws connecting the AMS lite and the stand
 |
 |
 |
 |
¶ Packing
¶ Step 1: Pack the accessories
 |
 |
¶ Step 2: Install the protection foam, and tape the box
 |
 |
 |
 |
 |
 |