¶ Introduction
To provide better protection for the heatbed cable, we recommend installing a dedicated heatbed cable protector. You can refer to this page to download and install this protector.
 |
 |
¶ Download and print the heatbed cable protector.
You can download the 3mf files of the heatbed protector directly on this page, or you can download the model from the Makerworld website.
- Model download link(click here to download the model directly)
- Makerworld link(click here to go to the Makerworld link)
Please configure the printing parameters according to your specific circumstances. For example, the example 3mf model is printed using an A1 printer, PEI textured bed, and Bambu PLA filament.
¶ Installation guide
Please follow these steps to install the heatbed cable protector:
¶ 1. Turn off the printer and unplug the power cord from the printer.
¶ 2. Align the two halves of the protector properly and ensure that the arrows point towards the root of the heatbed cable, i.e., the base direction.
¶ 3. Securely fasten the two halves of the protector by interlocking them.