The STL file of the "Fixture tool" shown in the video can be downloaded from here:
X1 Series/P1 Series/A1
For A1 mini users
Please select the correct type first and print after slicing.
Step1: Wipe the printing surface with detergent
Step2: Place the Sheet and the spring steel plate on the Fixture tool
Step3: Tighten the screws on both ends of the fixture tool securely.
Step4: Peel the adhesive film on the back half way off and align the sheet with the plate and attach the edge
Step5: Loosen the screws and remove one piece of the fixture tool to use as a scraper.
Step6: Use the Fixture tool to press the sheet while continuing to remove the adhesive film.
Step7: Remove the film of the new Transfer Sheet.