The H2D Status Indicator is installed at the front of the heated bed and is used to display the status of the printer.
Physical damage affecting functionality.
Confirmation by Bambu Lab official technical support that the status indicator needs replacement.
IMPORTANT!
It's crucial to power off the printer before conducting any maintenance work, including work on the printer's electronics and tool head wires. Performing tasks with the printer on can result in a short circuit, leading to electronic damage and safety hazards.
During maintenance or troubleshooting, you may need to disassemble parts, including the hotend. This exposes wires and electrical components that could short circuit if they contact each other, other metal, or electronic components while the printer is still on. This can result in damage to the printer's electronics and additional issues.
Therefore, it's crucial to turn off the printer and disconnect it from the power source before conducting any maintenance. This prevents short circuits or damage to the printer's electronics, ensuring safe and effective maintenance. For any concerns or questions about following this guide, we recommend submitting a technical ticket regarding your issue and we will do our best to respond promptly and provide the assistance you need.
The status indicator is fixed to the heatbed with clips. First, disconnect the status indicator connector. Then, hold the status indicator and firmly push from the back to release the rear clip. Once the rear clip is unlocked, push the status indicator backward to release the front clip and remove it.
![]() |
![]() |
The status indicator has two rows of clips. Align the longer front row of clips with the heatbed holes, insert them, and pull forward to lock them in place. Then, push the status indicator upward to lock the rear clips and reconnect the connector.
We hope the detailed guide provided has been helpful and informative.
If this guide does not solve your problem, please submit a technical ticket, we will answer your questions and provide assistance.
If you have any suggestions or feedback on this Wiki, please leave a message in the comment area. Thank you for your support and attention!