¶ Applicable models of printers
H2D
¶ When to use?
The toolhead front cover is broken.
¶ Remove the Toolhead Front Cover
Pinch the top of the toolhead front cover;
Lift the toolhead front cover upward.
¶ Install the Toolhead Front Cover
First snap the front cover into place under the extruder, then push it back to install the front cover in place.
¶ End Notes
We hope the detailed guide provided has been helpful and informative.
If this guide does not solve your problem, please submit a technical ticket, we will answer your questions and provide assistance.
If you have any suggestions or feedback on this Wiki, please leave a message in the comment area. Thank you for your support and attention!