The weeding tool can be used to lift or move materials, such as helping to remove waste material after cutting materials such as heat transfer vinyl. However, the use of the weeding tool is not limited to removing waste material, it can also assist in removing the complete vinyl.
Click here to print the weeding tool model.
Place the metal weeding tool into the 3D-printed handle groove so that the two flat surfaces of the weeding tool fit into the two corresponding grooves of the handle, and then close the handle.
While pressing the handle tightly, screw in the 3 screws.
The scraper can help remove material from the cutting mat.
Click here to print the scraper handle model.
The roller can help flatten the material to be cut so that it fits more evenly on the platform.