¶ 3D Printing:
-
Left nozzle: The maximum printable area in the horizontal direction is 325x320mm²; the maximum printable height is 320mm; the maximum printable volume is 325x320x320mm³;
-
Right nozzle: The maximum printable area in the horizontal direction is 325x320mm²; the maximum printable height is 325mm; the maximum printable volume is 325x320x325mm³;
-
Common print area for left and right nozzles: 300x320mm²; the maximum printable height is 320mm; the maximum printable volume is 300x320x320mm³;
-
Printer: The maximum printable area in the horizontal direction is 325x320mm²; the maximum printable height is 325mm; the maximum printable volume is 325x320x325mm³.
 The full print area of the printer |
 Printable area of the left nozzle |
 Printable area of the right nozzle |
 Common print area for left and right nozzles |
¶ Laser Module:
-
10W laser module: The maximum processing area is 310*270mm²; the maximum processing height is 280mm; the maximum printable volume is 310x270x280mm³;
-
40W laser module: The maximum processing area is 310*250mm²; the maximum processing height is 265mm; the maximum printable volume is 310x250x265mm³.
 10W laser module processing area |
 40 laser module processing area |
¶ Cutting/Drawing Module:
Cutting module: The maximum processing area is X300*Y285mm²;
Drawing module: The maximum processing area is X300*Y255mm².
 Cutting module processing area |
 Drawing module processing area |
Plus the overall area of the cutting protection base:
¶ End Notes
We hope the detailed guide provided has been helpful and informative.
If this guide does not solve your problem, please submit a technical ticket, we will answer your questions and provide assistance.
If you have any suggestions or feedback on this Wiki, please leave a message in the comment area. Thank you for your support and attention!