¶ Issue Description
The printer has an emergency stop button installed, but the safety key is not properly inserted, preventing the use of laser-related functions.
¶ Troubleshooting
¶ Tools, Equipment and Materials
- Safety key
¶ Solutions
This HMS alarm occurs when the emergency stop button is installed, but the safety key is not inserted. Please check whether the safety key is inserted into the keyhole on the back of the emergency stop button. If not, insert the safety key.
Please note that the emergency stop button cable plug and the safety key are directional and must be inserted correctly.
Then, install the emergency stop button on the side of the printer.
¶ End Notes
We hope the detailed guide provided has been helpful and informative.
If this guide does not solve your problem, please submit a technical ticket, will answer your questions and provide assistance.
If you have any suggestions or feedback on this Wiki, please leave a message in the comment area. Thank you for your support and attention!