¶ Fault Description
An error is reported when the AMS feeds material to the corresponding extruder.
Phenomenon when the fault occurs:
- Causes the AMS to fail in feeding material to the extruder.
¶ Troubleshooting
An error message will appear when the relationship between the upper and lower Hall sensors of the buffer and the left and right Hall sensors of the extruder is detected to be mismatched. Therefore:
-
Check the PTFE tubes between the extruder head and the buffer to ensure:
- The tube from the upper buffer is connected to the right extruder.
- The tube from the lower buffer is connected to the left extruder.
-
If incorrect, swap the PTFE connections:
- Press the black outer ring of the pneumatic connector above the extruder to unlock it.
- Pull out the tube and swap the left and right tubes.
¶ Equivalent Codes
The following HMS codes all represent the same type of fault:
| HMS Code | Fault Description |
|---|---|
| 0700-5500-0001-0002 | Incorrect connection order of PTFE tubes between the toolhead and the buffer. Please ensure: the upper part of the buffer is connected to the right extruder, and the lower part is connected to the left extruder. |
| 0701-5500-0001-0002 | Incorrect connection order of PTFE tubes between the toolhead and the buffer. Please ensure: the upper part of the buffer is connected to the right extruder, and the lower part is connected to the left extruder. |
| 0702-5500-0001-0002 | Incorrect connection order of PTFE tubes between the toolhead and the buffer. Please ensure: the upper part of the buffer is connected to the right extruder, and the lower part is connected to the left extruder. |
| 0703-5500-0001-0002 | Incorrect connection order of PTFE tubes between the toolhead and the buffer. Please ensure: the upper part of the buffer is connected to the right extruder, and the lower part is connected to the left extruder. |
| 1800-5500-0001-0002 | Incorrect connection order of PTFE tubes between the toolhead and the buffer. Please ensure: the upper part of the buffer is connected to the right extruder, and the lower part is connected to the left extruder. |
| 1801-5500-0001-0002 | Incorrect connection order of PTFE tubes between the toolhead and the buffer. Please ensure: the upper part of the buffer is connected to the right extruder, and the lower part is connected to the left extruder. |
| 1802-5500-0001-0002 | Incorrect connection order of PTFE tubes between the toolhead and the buffer. Please ensure: the upper part of the buffer is connected to the right extruder, and the lower part is connected to the left extruder. |
| 1803-5500-0001-0002 | Incorrect connection order of PTFE tubes between the toolhead and the buffer. Please ensure: the upper part of the buffer is connected to the right extruder, and the lower part is connected to the left extruder. |
| 1804-5500-0001-0002 | Incorrect connection order of PTFE tubes between the toolhead and the buffer. Please ensure: the upper part of the buffer is connected to the right extruder, and the lower part is connected to the left extruder. |
| 1805-5500-0001-0002 | Incorrect connection order of PTFE tubes between the toolhead and the buffer. Please ensure: the upper part of the buffer is connected to the right extruder, and the lower part is connected to the left extruder. |
| 1806-5500-0001-0002 | Incorrect connection order of PTFE tubes between the toolhead and the buffer. Please ensure: the upper part of the buffer is connected to the right extruder, and the lower part is connected to the left extruder. |
| 1807-5500-0001-0002 | Incorrect connection order of PTFE tubes between the toolhead and the buffer. Please ensure: the upper part of the buffer is connected to the right extruder, and the lower part is connected to the left extruder. |
¶ End Notes
We hope the detailed guide provided has been helpful and informative.
If this guide does not solve your problem, please submit a technical ticket, we will answer your questions and provide assistance.
If you have any suggestions or feedback on this Wiki, please leave a message in the comment area. Thank you for your support and attention!