The corresponding function of HMS_07FE-2000-0002-0004 is "External spool unloading", which means that printer will automatically cut off the filament in the extruder and unload the filament to the top of the extrusion wheel, and then prompts the user to manually pull out the filament.
None
Follow the pop-up prompts on the screen to pull out the filament from the external spool.
The following HMS codes represent the same type of issue.
| HMS Code | Description |
|---|---|
| 07FE-2000-0002-0004 | Please pull the external filament from the left extruder. |
| 07FF-2000-0002-0004 | Please pull the external filament from the right extruder. |
| 18FE-2000-0002-0004 | Please pull the external filament from the left extruder. |
| 18FF-2000-0002-0004 | Please pull the external filament from the right extruder. |
We hope the detailed guide provided has been helpful and informative.
If this guide does not solve your problem, please submit a technical ticket, we will answer your questions and provide assistance.
If you have any suggestions or feedback on this Wiki, please leave a message in the comment area. Thank you for your support and attention!