¶ Fault Description
During the foreign object detection process, it is found that the Live View Camera has not been calibrated before (it may also be that the mainboard has been replaced, and the replaced mainboard does not store the calibration configuration file), so re-calibration is required.
¶ Fault Location and Resolution Process
Perform Live View Camera calibration in the Tools -> Calibration menu.
Before starting the Live View Camera calibration, please check the following:
- The Live View Camera outputs images normally, and ensure that the camera privacy cover does not block the lens;
- Clear items on the heatbed and expose the heatbed markers.
¶ End Notes
We hope the detailed guide provided has been helpful and informative.
If this guide does not solve your problem, please submit a technical ticket, we will answer your questions and provide assistance.
If you have any suggestions or feedback on this Wiki, please leave a message in the comment area. Thank you for your support and attention!