¶ Fault Description
During the initial stages of 3D printing, laser mounting calibration, and die-cutting mounting calibration, the foreign object detection process cannot be executed.
¶ Troubleshooting
¶ Fault Location and Resolution Process
- Check if the live camera image is normal, ensuring that the camera privacy cover is not obstructing the lens.
-
Restart the printer and check if the issue is resolved.
-
If the problem persists, it is recommended to upgrade the printer's firmware to the latest version. If the firmware is already up to date and the issue remains after multiple restarts, please contact the customer service team for assistance.
¶ End Notes
We hope the detailed guide provided has been helpful and informative.
If this guide does not solve your problem, please submit a technical ticket, we will answer your questions and provide assistance.
If you have any suggestions or feedback on this Wiki, please leave a message in the comment area. Thank you for your support and attention!