Users can adjust the order of each troubleshooting measure as appropriate.
The following HMS codes all represent the same type of fault.
| HMS Code | Fault Description |
|---|---|
| 0700-9700-0003-0001 | AMS A cannot perform pre-feeding and auxiliary insertion currently, because one AMS is drying without being connected to a power adapter, or the chamber temperature of AMS A is relatively high. |
| 0701-9700-0003-0001 | AMS B cannot perform pre-feeding and auxiliary insertion currently, because one AMS is drying without being connected to a power adapter, or the chamber temperature of AMS B is relatively high. |
| 0702-9700-0003-0001 | AMS C cannot perform pre-feeding and auxiliary insertion currently, because one AMS is drying without being connected to a power adapter, or the chamber temperature of AMS C is relatively high. |
| 0703-9700-0003-0001 | AMS D cannot perform pre-feeding and auxiliary insertion currently, because one AMS is drying without being connected to a power adapter, or the chamber temperature of AMS D is relatively high. |
| 1800-9700-0003-0001 | AMS-HT A cannot perform pre-feeding and auxiliary insertion currently, because one AMS is drying without being connected to a power adapter, or the chamber temperature of AMS-HT A is relatively high. |
| 1801-9700-0003-0001 | AMS-HT B cannot perform pre-feeding and auxiliary insertion currently, because one AMS is drying without being connected to a power adapter, or the chamber temperature of AMS-HT B is relatively high. |
| 1802-9700-0003-0001 | AMS-HT C cannot perform pre-feeding and auxiliary insertion currently, because one AMS is drying without being connected to a power adapter, or the chamber temperature of AMS-HT C is relatively high. |
| 1803-9700-0003-0001 | AMS-HT D cannot perform pre-feeding and auxiliary insertion currently, because one AMS is drying without being connected to a power adapter, or the chamber temperature of AMS-HT D is relatively high. |
| 1804-9700-0003-0001 | AMS-HT E cannot perform pre-feeding and auxiliary insertion currently, because one AMS is drying without being connected to a power adapter, or the chamber temperature of AMS-HT E is relatively high. |
| 1805-9700-0003-0001 | AMS-HT F cannot perform pre-feeding and auxiliary insertion currently, because one AMS is drying without being connected to a power adapter, or the chamber temperature of AMS-HT F is relatively high. |
| 1806-9700-0003-0001 | AMS-HT G cannot perform pre-feeding and auxiliary insertion currently, because one AMS is drying without being connected to a power adapter, or the chamber temperature of AMS-HT G is relatively high. |
| 1807-9700-0003-0001 | AMS-HT H cannot perform pre-feeding and auxiliary insertion currently, because one AMS is drying without being connected to a power adapter, or the chamber temperature of AMS-HT H is relatively high. |
We hope the detailed guide provided has been helpful and informative.
If this guide does not solve your problem, please submit a technical ticket, we will answer your questions and provide assistance.
If you have any suggestions or feedback on this Wiki, please leave a message in the comment area. Thank you for your support and attention!