When the P1P/P1S is not connected to the Internet and cannot access the Bambu Lab Cloud Service, the printer's firmware can be upgraded via a microSD card and an offline upgrade package.
The print needs to revert to previous firmware versions.
The P1P/P1S firmware version must be at least 01.07.00.00 to support the offline firmware upgrade function. If the firmware version is lower than this version number, please upgrade the P1P/P1S online first.
microSD card.
If the computer does not have a microSD card reader slot, a card reader is required.
The whole process takes about 20 minutes.
Version | Download |
---|---|
01.07.00.00 | Click to download |
The Bambu Lab P1 series of 3D printers does not have a hot swappable card.
This means that every time when you remove the microSD card, it is very important to safely eject it from the menu, by following these steps:
The microSD card can now be removed from the printer. Simply press on the microSD card then release it. to eject it from the printer.
Important!
Do not modify the file name of the offline upgrade package or decompress the offline upgrade package, otherwise the upgrade will fail.
Important reminder!
Do not turn off the power during the firmware upgrade. Please wait patiently for 10-20 minutes.
We hope the detailed guide provided has been helpful and informative.
If this guide does not solve your problem, please submit a technical ticket, we will answer your questions and provide assistance.
If you have any suggestions or feedback on this Wiki, please leave a message in the comment area. Thank you for your support and attention!