This page contains short explanations about each main components of the P1 Series and links to the Bambu Store from where you can purchase them.
If there is no link to the store, and the component is not available to purchase directly, please contact our Customer Support team so we can assist.
Detailed guides for how to replace each part are available on the main P1 Series Wiki page and in the product description of the store.
¶ Front View
| 1. Screen | This component allows for interaction with the printer, and also displays information and error messages. |
| 2. Chamber Light | This component is used to illuminate the printer chamber |
| 3. Y-axis Linear Rod | This component is used for the Y axis motion system |
| 4. Camera | This component allows remote 3D printing monitoring and viewing in Bambu Studio and Bambu Handy. |
| 5. Z-axis Linear Rod | This component is used for the Z axis motion system |
| 6. Z-axis Threaded Rod | This component is used for the Z axis motion system |
| 7. Bed Leveling Knob | This component is attached to the heatbed and allows for manual bed leveing |
| 8. Micro SD | This is a memory device that holds the 3D printing files, Timelapse Videos and Log information. |
| 9. Toolhead | This component contains multiple parts like the Extruder, Hotend, Part Cooling Fan, Front Housing, Toolhead Board, Extruder Motor. |
| 10. X-axis Carbon Rods | This component is part of the X-axis motion system where the Toolhead moves on the X-axis. |
| 11. Auxiliary Fan | This component is used to help cool the printed layers faster in order to achieve fast printing speed. |
| 12. Heatbed | This component is where the Build Plate is magnetically installed, which moves on the Z-axis during printing. |
| 13. Build Plate | This component is the surface which magnetically attaches to the Heatbed and the model is printed on. |
¶ Toolhead View
| 1. Filament Cutter Lever | This component provides the mechanical cutting force to the Filament Cutting Blade. |
| 2. X-axis Carbon Rods | This component is part of the X-axis motion system where the Toolhead moves on the X-axis. |
| 3. Extruder Gear | This is the motor attached to the Extruder Unit which provides motion to the Extruder Gear Assembly |
| 4. Y-axis Linear Rail Bearing | This component is part of the Y-axis motion system to allow the X-axis to move back and forward. |
| 5. Front Housing | This component is part of the Tollhead Assembly, and contains the Part Cooling Fan and Air Duct |
| 6. X-axis Toothed Idler | This component is part of the X-axis motion system and the belt runs over it. |
| 7. X-axis Smooth Idler | This component is part of the X-axis motion system and the belt runs over it. |
| 8. Part Cooling Fan | This component cools the printed layer lines to solidify the filament quickly. It's part of the Front Housing Assembly |
| 9. Part Cooling Fan Air Duct | This component helps direct the airflow from the Part Cooling Fan. It's part of the Front Housing Assembly |