¶ Introduction
After you have obtained the new filament from Bambu Lab, please follow the steps below to update the filament in Bambu Studio so that you can configure and print with the new filament.
¶ How to update the Filament Profile Package?
¶ Step 1：Open Bambu Studio and click Prepare.
¶ Step 2：The instruction will pop up in the lower right corner of the screen, and click Detail.
¶ Step 3：Click on the button of Set filaments to use on the far right of the Filament column.
¶ Step 4：In System Filaments, find the new filament (Bambu Support for ABS for example) and check the box, then click on Confirm in the bottom right corner.
¶ Step 5：The update is complete and the new filament can be selected in the Filament selection box.
¶ End Notes
We hope that the detailed guide we shared with you was helpful and informative.
If you have any concerns or questions regarding the process described in this article, we encourage you to reach out to our friendly customer service team before starting the operation.
Our team is always ready to help you and answer any questions you may have.
Click here to open a new ticket in our Support Page.