This release mainly adds some features, improvements, and fixes based on user feedback.
This version has incorporated many features from OrcaSlicer and the community. We try to annotate each item as much as possible. If anything is missed, everyone is welcome to point it out. Once again, thank you for the outstanding contributions from the community.
Usually these calibrations are unnecessary, the normal print will have a good result in most cases by using the default parameters which were pre-calibrated and fine tuned. Please refer to the wiki for introduction and wiki for more details.
Auto Flow Dynamics Calibration:
Manual Flow Dynamics Calibration:
3mf/.gcode.3mf files generated from this version, can be used for parts selectable skipping on the printer side. Single-material printing is required and less than 64 objects per plate. Please update the printer firmware to V01.06 as well.
Manage model files on printers through Studio and initiate printing. Please update the printer firmware to X1 V01.06 as well.
Check the video for more details: https://youtu.be/uWwrnJWNR6I
Boolean operations are now supported in Bambu Studio. With the latest Mesh Boolean tool, you can either make Union, Difference (Subtraction) or Intersection between 2 parts. However, please be noted that mesh boolean itself is a complicated topic, even for profesional CAD softwares. It may fail on some meshes, including the builtin "Cone" model. We are working to enhance the stability of these operations.
This function is based on mcut, thanks to all the contributors of mcut
Check the video for more details: https://youtu.be/DZ_D7oA0YzU
Supports more third-party printers profiles, including Anker, Anycubic, Creality, Elegoo, Prusa, Qidi, Voxelab；also support third-party printer's preview/calibration and a lot of slicing settings.
This function is ported from OrcaSlicer, thanks to @softfever and all the contributors from the community.
Check the video for more details: https://youtu.be/5a7sn1b-AlY
Liveview Enhancement for P1P.
This version of Bambu Studio implements support for the new firmware feature we previously introduced with the P1P, where liveview is now supported from outside the local network. This means that you can now access the camera from anywhere in the world, directly from Bambu Studio.
Please update the printer firmware to V01.04 as well.
Liveview in LAN only mode (X1)
We have received multiple requests from our customers in regard to having liveview available in LAN only mode. The latest firmware for X1 series combined with the latest version of Bambu Studio introduces support for accessing the video from the printer locally, without requiring an internet connection.
Please note that when the printer is set in LAN only mode, you will not have access to the liveview stream from Bambu Handy.
Please update the printer firmware to V01.06 as well.
Support Bambu Lab P1S.
Support Dark Mode for Linux systems.
We know a lot of our customers love Dark Mode. To ensure Bambu Studio has the same features on all platforms, this version introduces support for Dark mode for Linux systems.
Add developer mode to view and edit more parameters. A lot of parameters is ported from OrcaSlicer or ported from PrusaSlicer. Thanks!
Optimize the performance of the top one wall function to reduce slicing time
Add concentric ironing pattern
Add setting to change internal solid infill pattern
Add only one wall function for the first layer
Change the default wall generator to be arachne, and change the wall default wall loop to be 3.
Attention: only one wall on top surface has conflicts with arachne, so it's disabled when enable arachne. It will be fixed in the future.
Show Overhang area in "3D Prepare Tab"
Support displaying the overhang area of a model directly in the "3D Prepare Tab" by Menu->View->Show Overhang
Display the number of selected parts when multiple objects selected
Enhances print stability by alternating the direction of grid infill paths between layers.
Grid infill video https://youtu.be/2Gz3TS3oQjs
Re-add the function "Fill bed with instances"
Allow to disable "small overhang removal"
Allow to set tree support brim width
Previously, the tree support brim width is automatically calculated, and there is no way to manually set it. Now we open the setting, with the value 0 meaning the auto calculated brim width.
Optimized the file size when saving 3MF.
When there are multiple copies of model objects and parts, only one set of model data is saved in the 3MF file.
Display various network error messages
More detailed error description will be displayed when binding the printer/sending printing fails