This is a function enhancement version based on 22.214.171.124. And this version includes some new features and bug fixes.
Currently, the function is not in its optimal state. Changing the filament and flushing cannot be skipped, even if the filament becomes useless after skipping objects. If we skip filament changes and flushing when the filament is deemed useless, the filament ordering would change as well. This could lead to disorganized flush volume and cause color mixing in the models. Despite these challenges, users can still benefit significantly by only excluding failed objects in multi-filament printing. We will continue to improve and plan to support skipping flushing and changing filaments in the future.
This feature has been requested by many users on GitHub. Find more details here. Thanks to everyone for their suggestions! The GIF below demonstrates the operation of changing the filament order of the first layer.
The model used in this demonstration is from Clem 3DVO. Thanks!
This is a function from PrusaSlicer and we just bring it back. Thanks PrusaSlicer!
In addition, a brim ear can be generated by applying the clipping order while using support filament. Users can merge small disc parts to the model, and use support filament to print it as a brim. The GIF below shows that process. The model used in this demonstration is from Estudio Aditivo. Thanks!
It's an experimental function, and the elephant foot compensation needs to be set to 0 mm if you add a brim ear for an additional part of a model. We will continue to follow users' suggestions!
Thanks @thewildmage for the original code contribution! https://github.com/bambulab/BambuStudio/issues/2222.
Fix the interface mess of tree support on MacOS
Fix login dialog failure in some language.
Fix the Mesh Boolean incorrect after scaling
Fix crash within SD card model.
Pick bugfix for zero-width tree supports from OrcaSlicer. Thanks @scottmudge!
Fix the issue of mess travel when disable wipe while retracting,
Fix the issue that Flow Rate Calibration in auto mode always return 0,00 in languages,
Fix the issue that flow rate calibration pattern is too crowded with 0.8mm nozzle, https://github.com/bambulab/BambuStudio/issues/2296