P1 series supports AMS 2 Pro and AMS HT since version 01.09.00.00.
Due to firmware limitations, if you need to update the firmware via microSD card and are connected to AMS 2 Pro and AMS HT, please follow this document to update.
If your printer firmware version is not lower than 01.09.00.00, you can ignore this page and follow Firmware Upgrade via microSD Card - X1 Series to update the firmware.
¶ Update steps
- Disconnect AMS 2 Pro and AMS-HT from the printer;
 AMS 2 Pro |
 AMS-HT |
-
Refer to Firmware Upgrade via microSD Card - X1 Series to upgrade the printer firmware to the 01.08.50.32 ;
-
Connect AMS 2 Pro and AMS-HT;
 AMS 2 Pro |
 AMS-HT |
¶ End Notes
We hope the detailed guide provided has been helpful and informative.
If this guide does not solve your problem, please submit a technical ticket, we will answer your questions and provide assistance.
If you have any suggestions or feedback on this Wiki, please leave a message in the comment area. Thank you for your support and attention!