In the box of X1C and X1, in order to facilitate the use of the product, we have configured some small accessories. The following is a brief description of these small accessories.
NO. | Physical photos | Descriptions | Applications | Marks |
1 |
![]() |
Bambu cool plate | Placed on the heat bed to hold the model. | Both sides can be used. One side is for PLA/PETG/ABS, the other side is for PC/TPU. |
2 |
![]() |
Spare sheet for bambu cool plate | Replace the sheet when it is damaged. | |
3 |
![]() |
Hotend with hardened steel nozzle (0.4 mm) | X1C spare hotend, replace the original nozzle when it is damaged. | For X1C and X1C combo |
4 |
![]() |
Hotend with stainless steel nozzle (0.4 mm) | X1 spare hotend, replace the original nozzle when it is damaged. | For X1 |
5 |
![]() |
Bambu bus cable (4PIN) | Communication cable connecting the printer and the AMS buffer | For the X1C combo only |
6 |
![]() |
Bambu bus cable (6PIN) | Communication cable connecting the AMS and the AMS buffer | For the X1C combo only |
7 |
![]() |
Filament cutter | Spare cutter for replacement | For the X1C combo only |
8 |
![]() |
Retaining clip & hot end srcews | Spare retaining clip and hot end retaining screws, which may be needed when replacing the hot end, the ceramic heater, or the thermistor. | |
9 |
![]() |
Bambu glue stick for build plate | Apply evenly to the cleaned build plate before printing and cover all print areas. | |
10 |
![]() |
H1.5/H2.0 hex keys | Disassembly and assembly tools | |
11 |
![]() |
Lubricant grease | Special grease for lead screw | |
12 |
![]() |
Bambu scraper | Print 'Scraper grip' from the built-in files, and then install the scraper to it. | |
13 |
![]() |
Spool holder | It is installed on the back of the printer, fixed with 2 screws. | |
14 |
![]() |
Spare screws for the extruder | Spare screws for extruder | |
15 |
![]() |
Uncloged tool for 0.4 mm nozzle | Special uncloged tool for the 0.4 mm hot end | The hot end has been separated from the extruder and is heated. |
16 |
![]() |
Thermal grease |
Improve the thermal conductivity of the thermistor、ceramic heater with the nozzle, which may be used when replacing the above accessories. |
|
17 |
![]() |
Nozzle wiper | Spare nozzle wiper, replace it when the wiper is damaged. | |
18 |
![]() |
3M VHB double-side tape | Use when reattaching the auxiliary part cooling fan, or when adding this fan to the X1. |