When printing with Bambu Studio, it's possible to send the sliced files directly to the printer via Wi-Fi. Here's how to do it:
Import the 3D model you want to slice, and after adjusting the settings, click on the Slice button
After the model has been sliced, click on the Print button. A window will show up where the printer can be selected, and the calibration options can be enabled or disabled.
When ready to print, simply click the Send button, and the file will be sent to the printer. The printing process will start.
Note:
A print file will be transferred to printer directelly only when Studio can find printer in local network and a SD card is in the printer. Else it will be transferred to cloud and then send to printer (when printer's LAN mode is not enabled).
Even a print file may transfer to printer directelly, it still need to be transferred to cloud to support the history print feature in Bambu Handy (when printer's LAN mode is not enabled). The file in cloud will be removed after 90 days by default. It will be removed in 72 hours if user removed the corresponding print history or enabled incognito printing mode in Bambu Handy.
If you don't want print files to be transferred to cloud, please enable printer's LAN mode or copy print files to SD card for the print.
You can monitor the printing process in the Printer tab of Bambu Studio, where you can also control some of the printer's features.
To make things easier, we also prepared a video for this: