Open the cardboard box and remove the foam inserts.
Take out the plastic bag and retrieve the Quick Start Guide from the top cover (please read the Quick Start Guide before proceeding to the next step). Take out the printer and the filament spools and air filter included at the bottom of the box.
¶ Step 2: Remove the glass top cover and the plastic bag protecting the front door glass.
Carefully connect the ribbon cable to the touchscreen. You may need to gently pull the ribbon cable, so handle it with caution to avoid damage. When inserting the ribbon cable, ensure the correct orientation and try to insert it vertically. If you need to remove it, make sure to press the buttons on both sides to release the metal latch.
¶ Step 11: Install the external spool holder and put the glass top cover back in place.
