HMS_0300_0A00_0001_0001 The sensititvity of heatbed force sensor 1/2/3 is too high.
" The sensitivity of heatbed force sensor 1/2/3 is too high. The electronic connection to the sensor may be broken. "
The error code below shows the same problem with different force sensors:
0300-0A00-0001-0001
0300-0B00-0001-0001
0300-0C00-0001-0001
Please refer to the following Wiki for troubleshooting guide steps:
HMS_0300_0D00_0001_000B The Z axis motor seems got stuck when moving up. Please check if there is any foreign matter on the Z sliders or Z timing belt wheels