¶ Error message
HMS_0300-9000-0001-0002: Chamber heating failed. The chamber may not be enclosed, or the ambient temperature may be too low, or the heat dissipation vent of the power supply may be blocked.
“Chamber heating failed. The chamber may not be enclosed, or the ambient temperature may be too low, or the heat dissipation vent of the power supply may be blocked.”
0300-9000-0001-0002
¶ The cause of the error
When the outside temperature is too low or the chamber is not closed, the chamber may not be heated to the predetermined temperature due to excessive heat dissipation. In addition, when the power supply is derated due to its inability to dissipate heat, the cavity temperature controller may also lack sufficient power to heat the cavity to a predetermined temperature.
¶ Solution
1. Check the printer chamber to make sure the chamber is closed (front door and top glass cover);
2. Check the ambient temperature to avoid using the printer in an environment that is too cold;
3. Check the heat dissipation vent of the power supply to ensure that it is not blocked by trash cans or other components.
If the problem cannot be solved after taking the above measures, please submit the ticket to contact the support team.
¶ End Notes
We hope the detailed guide provided has been helpful and informative.
To ensure a safe and effective execution, if you have any concerns or questions about the process described in this article, we recommend submitting a Technical ticket regarding your issue. Please include a picture or video illustrating the problem, as well as any additional information related to your inquiry.