HMS_0300-9000-0001-0005: Chamber heating failed. The thermal resistance is too high.
The chamber will perform thermal resistance calculations during the heating process. When the thermal resistance value is significantly higher than the normal value, the chamber can not be heated normally. This condition is usually caused by blockage of heat transfer between the upper and lower parts of the chamber.
Avoid insulation of some areas inside the printer chamber to allow complete heat circulation.
If the problem can not be solved after taking the above measures, please contact the support team.
We hope that the detailed guide we shared with you was helpful and informative.
We want to ensure that you can perform it safely and effectively. If you have any concerns or questions regarding the process described in this article, we encourage you to reach out to our friendly customer service team before starting the operation. Our team is always ready to help you and answer any questions you may have.
Click here to open a new ticket in our Support Page.
We will do our best to respond promptly and provide you with the assistance you need.