The chamber camera failed to get image indicating the chamber camera hardware failure.
In the X1C printer, this error message will be reported when the chamber camera fails to read the image correctly.
Be sure to power down the printer before you check and replace the camera.
Turn off the printer, and follow the instructions below to plug and unplug the camera cable.
https://wiki.bambulab.com/x1/maintenance/replace-chamber-camera
Power on the printer, and use the app or studio software to connect the printer to check whether the real-time video of the chamber camera is normal.
If the above operations cannot solve the problem, please contact the after-sales service for the replacement of the chamber camera accessories。
https://wiki.bambulab.com/x1/maintenance/replace-chamber-camera
The message should disappear if the problem is solved.
HMS_0C00-0100-0002-0008: Failed to get image from chamber camera. Spaghetti and waste chute pileup detection is not available for now.
0C00-0100-0002-0008
We hope the detailed guide provided has been helpful and informative.
To ensure a safe and effective execution, if you have any concerns or questions about the process described in this article, we recommend submitting a Technical ticket regarding your issue. Please include a picture or video illustrating the problem, as well as any additional information related to your inquiry.