¶ What it is
The new Micro Lidar detected occurs when replacing a new lidar accessory. The system will detect the configuration and calibration parameters of the lidar and perform online calibration.
¶ Safety warning and Machine state before starting operation
None
¶ Operation guide
¶ Step 1
Power on the printer, click Machine Calibration and wait for the calibration to complete.
Please note that device self-test and factory reset calibration do not include micro lidar calibration. If you need to calibrate the micro lidar, you need to select the micro lidar calibration option in the calibration menu and start calibration.
 |
 |
¶ Step 2
Trigger the machine to print to see if the lidar-related functions work normally.
¶ How to verify completion/success
The message should disappear if the problem is solved.
¶ Error message
HMS_0C00-0200-0001-0005: A new micro lidar is detected.
0C00-0200-0001-0005
¶ End Notes
We hope the detailed guide provided has been helpful and informative.
To ensure a safe and effective execution, if you have any concerns or questions about the process described in this article, we recommend submitting a Technical ticket regarding your issue. Please include a picture or video illustrating the problem, as well as any additional information related to your inquiry.