We use multiple exposure time to capture the laser line and choose the best exposure. Under this exposure time the laser line should be bright and thin. This is crucial for accurate depth measuring. However, if the build plate is dirty (e.g. covered with white filament residual), the laser line may be too thick.
This is just a warning message, which means it won't affect the functions of Micro Lidar in general. We recommend you check if the build plate is clean and undamaged.
HMS_0C00-0200-0002-0002: Laser too thick
The horizontal laser line is too thick in the camera view.
0C00-0200-0002-0002
We hope the detailed guide provided has been helpful and informative.
To ensure a safe and effective execution, if you have any concerns or questions about the process described in this article, we recommend submitting a Technical ticket regarding your issue. Please include a picture or video illustrating the problem, as well as any additional information related to your inquiry.