First layer inspection terminated due to abnormal lidar data indicates that the data is abnormal during the scanning process. This error message will appear when there are software problems such as abnormal scan data
None
Trigger printing multiple times or restart the device to see if the error persists.
If the above operations cannot solve the problem, please contact the after-sales service for the replacement of Micro Lidar.
https://wiki.bambulab.com/x1/maintenance/replace-micro-lidar
The message should disappear if the problem is solved.
HMS_0C00-0300-0002-0002: First layer inspection terminated due to abnormal lidar data.
0C00-0300-0002-0002
We hope the detailed guide provided has been helpful and informative.
To ensure a safe and effective execution, if you have any concerns or questions about the process described in this article, we recommend submitting a Technical ticket regarding your issue. Please include a picture or video illustrating the problem, as well as any additional information related to your inquiry.