¶ What it is
Possible first layer defects. The micro-lidar detects small defects in first layer, but not severe enough to trigger print pause action. As a system information, the user may want to check the quality to decide whether to stop the printing.
¶ Troubleshooting
Check the first layer quality either through bare eyes or chamber camera live view. If the quality is not acceptable, stop the printing.
¶ Error message
HMS_0C00-0300-0003-0007: Possible first layer defects.
0C00-0300-0003-0007
¶ End notes
We hope our guide was helpful. If you have any questions or concerns about the process, please contact our customer service team. We're here to assist you.
Click here to open a new ticket in our Support Page.
We will do our best to respond promptly and provide you with the assistance you need.