¶ When to use?
If the filament spool becomes detached during use and the spool/filament cannot be put back, you can refer to this guide to fix the filament.
Note: This article is not applicable to when the filament is completely scattered apart.
¶ IMPORTANT!
- When the tray is scattered, please move the filament carefully to avoid it falling and becoming completely unusable.
- The installation method for refill filaments can be referenced in this guide: Replacing filament with Bambu Reusable Spool | Bambu Lab Wiki.
- If you have any questions about this guide, please submit a ticket here and we will respond promptly and provide you with the help you need.
¶ Tools and materials needed
¶ Use the Fixing Tool to Fix the Filament
Before starting, please check if the filaments are tangled. If there are tangling issues, please refer to this Wiki for assistance: Filament tangled or stuck | Bambu Lab Wiki.
¶ Step 1：Print the fixing tool
You can print a fixing tool first.
¶ Step 2：Fix the filament
- Insert the fixing tool into the spool.
 |
 |
 |
- Tighten the fixing tool.
¶ Print with a Filament Holder
If the spool is too wide to fit in the AMS after being fixed, you can print a filament holder to hold the filament so that you can print with an external spool.
¶ Step 1：Print the filament holder
You can print a filament holder first.
¶ Step 2：Place the filament on the holder
- Insert the bearing into the spool and tighten it.
 |
 |
- Place the filament on the holder to ensure that the filament can rotate smoothly.
¶ End Notes
We hope the detailed guide provided has been helpful and informative.
To ensure a safe and effective execution, if you have any concerns or questions about the process described in this article, we recommend submitting a Technical ticket regarding your issue. Please include a picture or video illustrating the problem, as well as any additional information related to your inquiry.