Page under construction, please stay tuned.
The laser module and laser upgrade kit are sold together, but the laser module will be shipped separately. Please check the delivery details of the other package.
You will receive two packages, the laser upgrade kit and the laser module.
Note: Since some batches of the birdseye camera buckles will be shipped separately, some users may receive three packages.
All accessories in the steps in this article must be installed correctly to ensure that the laser works properly.
You can use the H2.0 Allen key in the H2D accessory box to assemble the laser upgrade kit. The brush and H2.5 Allen key can be used for laser module cleaning and maintenance in the future. For specific operations, please refer to: Regular maintenance recommendations for 10w laser module and Regular maintenance recommendations for 40w laser module.
In the future, we will also launch a cutting upgrade kit. Please stay tuned for updates!
We hope the detailed guide provided has been helpful and informative.
If this guide does not solve your problem, please submit a technical ticket, we will answer your questions and provide assistance.
If you have any suggestions or feedback on this Wiki, please leave a message in the comment area. Thank you for your support and attention!