https://public-cdn.bblmw.com/wiki/H2D/safety-guidelines/Laser-safety-guidelines-EN.mp4
Important!!!
Thank you for choosing Bambu Lab H2D and the laser module. Before using the laser equipment for the first time, carefully read the 'Quick Start Guide', 'Disclaimer', 'User Agreement', and Related Safety Information Documents. Take the time to understand operational, laser, chemical, fire, and electrical safety precautions to ensure safe and proper use of the equipment.
Before using this product, carefully read the 'Quick Start Guide' and 'Disclaimer,' paying close attention to the installation steps and safety information. Please follow all instructions and comply with the specified restrictions. Ensure that you understand and adhere to all steps, safety risks, and handling measures associated with the use of this product.
Ensure that the front door, side windows, and top cover are laser safety windows and remain closed during laser operation.
Laser cutting generates smoke that can affect air quality if not properly ventilated. To address this, you should ventilate the air outside by using the smoke exhaust pipe or use a smoke purifier (available to purchase separately)
Before exhausting the ventilated air outside, confirm compliance with local laws and regulations to ensure it does not negatively impact the surrounding environment.
Ensure the emergency stop button is correctly installed and operational. Confirm that the laser platform is correctly installed, the laser module is properly mounted, and all connections to the laser module and air assist tube are secure.
If significant smoke leakage or unusual odors are detected, immediately terminate the laser operation, inspect the ventilation system for issues, and make the necessary adjustments to restore normal operation.
For detailed installation instructions, please scan the provided QR code.
Introduction to the main components and workflow of the laser module
To ensure the smooth progress of the task and to mitigate potential safety risks, please make sure to set the correct parameters in the processing software. Additionally, do not engrave or cut any materials that may release harmful gases, as well as any unknown or unfamiliar materials.
Mirror-like surfaces can reflect the laser, posing risks of equipment damage or user injury.
Throughout the laser operation, ensure someone is present to supervise and ready to press the emergency stop button if needed, cutting off power immediately in an emergency or unexpected situation.
To prevent eye discomfort caused by prolonged direct observation of the laser spot and reflections, it is recommended to monitor the task using the live view feature instead of direct observation.
Keep a CO2 fire extinguisher or other appropriate fire suppression equipment readily available near the machine. Regularly inspect and maintain the equipment to ensure it is in proper working condition, following applicable standards and guidelines to prevent accidents.
After completing each project, it is essential to clean up debris and dust in the work area to minimize fire risks and exposure to harmful particulate matter.
Smoke accumulation inside the machine can lead to decreased efficiency, reduced performance, and potential damage.
Regular maintenance should be performed according to the equipment's maintenance prompts and the detailed guidelines provided in the wiki.
Laser Module Maintenance Guide
This document will be updated regularly, so please revisit it periodically to stay informed.
We hope the detailed guide provided has been helpful and informative.
If this guide does not solve your problem, please submit a technical ticket, we will answer your questions and provide assistance.
If you have any suggestions or feedback on this Wiki, please leave a message in the comment area. Thank you for your support and attention!