The Z-axis lead screw of a 3D printer requires regular greasing to reduce friction and wear, ensure the rise and fall of the heatbed more smooth, avoid jamming and layer lines, improve printing accuracy, reduce noise, prevent rust and dust, and thus extend the service life of the lead screw and nut.
Lubricant grease
Lubricant oil
Non-woven fabric
Gloves
H2 Series: https://wiki.bambulab.com/en/general/lead-screws-lubrication
X/P Series: https://wiki.bambulab.com/en/general/lead-screws-lubrication
We hope that the detailed guide we shared with you was helpful and informative.
We want to ensure that you can perform it safely and effectively. If you have any concerns or questions regarding the process described in this article, we encourage you to reach out to our friendly customer service team before starting the operation. Our team is always ready to help you and answer any questions you may have.
Click here to open a new ticket in our Support Page.We will do our best to respond promptly and provide you with the assistance you need.