- Purge optimization: Without color bleeding, official multicolor prints with some color filaments achieve an average of 20.9% purge savings.
- Long retraction enabled for more materials: X/P/A series printer now supports long retraction for PLA Basic, PLA Matte, PLA Galaxy, PLA Marble, PLA Glow, PLA-CF, PETG HF, PETG Translucent, PETG-CF, ABS, ABS-GF, ASA, Support for PLA/PETG, and Support for ABS.
- Purge optimization for 12 colors: Purge savings are now supported for Bambu PLA Basic filaments in 12 colors (Red/Black/Brown/Gray/Yellow/Bambu Green/Blue Gray/Light Gray/Dark Gray/Purple/Blue/Orange), significantly reducing waste in multicolor prints using these filaments. (Note: Automatic purge optimization is currently limited to Bambu Lab's official filaments. Due to the variations in third-party filaments, consistent color change results cannot be guaranteed. For third-party filaments, please adjust settings manually).
Thanks to @SnK3DD for the cute pumpkin model.
- Brim ear tool: The new version allows automatic or manual addition of "mouse-ear-shaped" brims to specific object edges. In automatic mode, parameters are:
- Scarf seam enabled for more materials by default: Bambu PLA Basic/Matte/Silk/Galaxy/Dynamic/Glow/Marble/Sparkle and PLA-CF now default to Scarf Seam, with commonly used parameters relocated under filament settings for easier differentiation across materials.
- Added Print History at the Bottom of Homepage: A new print history section has been introduced, allowing for easy tracking and review of past print records.
- Subnet binding support: Users can now bind printers across different subnets by directly entering the printer's IP address and Access Code(Supported P-series firmware version:01.07.00.00,supported A-series firmware version:01.04.00.00,supported X-series firmware:next release version).
(https://github.com/bambulab/BambuStudio/issues/702 ,https://github.com/bambulab/BambuStudio/issues/4202 ,https://github.com/bambulab/BambuStudio/issues/4878 )
- Edit filament information during printing: P-series and A-series printers now support editing filament information during printing, even for filaments not currently in use or in 'Auto-Fill' mode. This includes both external spool slots and AMS slots. Users can replace an empty spool before it's fully consumed, and the new spool will automatically continue the current print.(Supported P-series firmware version:01.07.00.00,supported A-series firmware version:01.04.00.00)
- Auto calibration for A series: A-series printers now support auto-calibration triggering from the calibration page.(Supported A-series firmware version:01.04.00.00）
- Filament Thermal Scaling Compensation Setting: Added a scaling compensation option in the filament settings, allowing adjustments for shrinkage after cooling (e.g., if a 100mm block in the X direction measures only 94mm after printing, the shrinkage percentage is 94%). This setting scales the model dimensions in the XY plane for shrinkage compensation, while the Z direction remains unchanged.Thanks to SuperSlicer.
Note: If adjusting the compensation to less than 100%, ensure adequate space between objects to avoid collision.
(https://github.com/bambulab/BambuStudio/issues/350, https://github.com/bambulab/BambuStudio/issues/2769)
- Added MakerWorld Search Box on Homepage.
- Improved 3MF compatibility for multiple printer models: When switching between large and small print beds, automatic part arrangement and wipe tower repositioning prevent collisions with printed parts. This makes it easier to print X or P series 3MF project files on the A1 mini.(model from @linus3d)
- Wipe tower collision risk reduction:
- Optimize the starting position of the printing wiper tower after material change, the initial print on the wipe tower sometimes had under-extrusion issues, and all layers of wipe tower have the same starting position, increasing the risk of collision. This optimization distributes the initial extrusion over four corners, reducing the accumulation of defects.
- Reducing the rivet length between the wipe tower's outer wall and infill to 0mm minimizes the risk of collision when switching between printing infill and outer walls.
- Display estimated print end time: This is an estimated time for reference only and may have significant deviations in specific scenarios.
(https://github.com/bambulab/BambuStudio/issues/3923 ,https://github.com/bambulab/BambuStudio/issues/4748 ,https://github.com/bambulab/BambuStudio/issues/4428 ,https://github.com/bambulab/BambuStudio/issues/3302 ,https://github.com/bambulab/BambuStudio/issues/2517)
- Retain color information after split to object/part: No need to worry about losing color information when right-clicking to split an STL file.
- Ironing inset feature: Controls ironing only in non-exterior wall areas, preventing uneven edges due to excessive material ironing.
(https://github.com/bambulab/BambuStudio/issues/2872 )
- Allow paint-on support on vertical surfaces: Allow paint-on support on vertical surfaces of tall objects, reducing the risk of falling down during printing.
- Improved preset package update notifications: Users will now receive automatic pop-up notifications when preset updates are available, similar to software updates. There’s also a manual check option.
- Improved boolean tool selection interaction: Objects for Boolean operations can now be selected directly from the object list.
- Third-party model addition: Tear-shaped cylinders can now be added as negative parts for creating horizontal holes suitable for 3D printing.Thanks to @Ro3Deee for your model.
(https://github.com/bambulab/BambuStudio/issues/4023)
- SVG tool interaction upgrades: Thanks to @Jony01 and @Noisyfox for your contributions.
- Create heat beds with specific region logos: Thanks to @emberprototypes for your pattern.
(https://github.com/bambulab/BambuStudio/issues/3634)
- New icon for parts with variable layer height.
- Cooling parameters resolve: A new parameter allows control over whether bridging lines are included in cooling slowdown.(model from @bubujiaoqv)
(https://github.com/bambulab/BambuStudio/issues/3816)
- Mesh accuracy options for STEP import: Now users can set STEP import accuracy by adjusting line and angular deflection.
(https://github.com/bambulab/BambuStudio/issues/3437)
.png)
- Enhanced coordinate systems in Move/Rotate tools: Users can freely move and rotate parts within assemblies using World coordinates, Object coordinates, or Part coordinates.Thanks to Prusa3D and @enricoturri1966.
(https://github.com/bambulab/BambuStudio/issues/4024 ,https://github.com/bambulab/BambuStudio/issues/4088 ,https://github.com/bambulab/BambuStudio/issues/4868)
- Auto homing now requires confirmation: Prevent accidental activation.
- New print plate added: Bambu Plate Cool SuperTack is compatible only with specific materials: PLA, PETG, PET, Support for PLA/PETG, PVA, and PLA Aero. Please note that Support for PLA/PETG is not suitable for the first layer of printing.
- Stop print button optimization: Prevents accidental presses.
(https://github.com/bambulab/BambuStudio/issues/3867)
- Newly imported parts’ initial position adjustment: Prevents newly imported parts from being too close to existing parts.
- Third-party printer preset additions: See the newly added third-party printers below, thanks to @Geeetech3D and OrcaSlicer.
- K1(0.6mm/0.8mm nozzle)
- K1C(0.4mm/0.6mm/0.8mm nozzle)
- K1Max(0.6mm/0.8mm nozzle)
- Ender V3(0.4mm/0.6mm nozzle)
- Ender V3Plus(0.4mm/0.6mm nozzle)
- Ender KE(0.4mm nozzle)
- Anycubic korbra plus
- Elegoo Neptune 4
- Eleego Neptune 4 Max
- Elegoo Neptune 4 plus
- Elegoo Neptune 4 pro
- Geeetech
- Korean translation updates: Thanks to @bluesoul33.
- Portuguese translation updates.
- Optimized memory consumption in the Device Tab, significantly reduced newly occurring page faults.
(https://github.com/bambulab/BambuStudio/issues/3702)
- Text tool coordinate system optimization: Fixes issues where text placement was incorrect after scaling, rotating, or mirroring parts.
- Display mesh with a transparent shell under Preview mode: Thanks to Prusa3D.
- Role-based wipe speed parameter added: We've introduced this option to ensure that the wiping speed is determined by the type of extrusion line currently being printed. For example, if a wipe occurs after an outer wall extrusion, the wiping speed will match the extrusion speed of the outer wall. Thanks to OrcaSlicer.
- MakerWorld upload button position adjustments: Prevents confusion where users mistakenly think they are uploading to the printer.
- Adjustable handle size in Move/Rotate tools.
(https://github.com/bambulab/BambuStudio/issues/3753)
- Automatic Beta version push supported: By selecting "Preferences - General Settings - Support beta version update," you will receive a pop-up notification as soon as a new Beta version is available.
- Network status notification: Added a pop-up alert when the cloud server cannot be connected.
- When changing filaments, if the PA profile contains an option matching the filament name, the system will automatically match the PA value with the same name.
- Improvements to various compilation issues, thanks to @hadess,@FFY00 and @dankamongmen.
- Thanks to @fatih5228 for contributing updates to the Turkish translations.
- Thanks to @HYzd766 for contributing to the configuration of new QiDi machines.
- Special thanks to @iZonex for the updated Ukrainian translation.
- Fixed formatting errors in the slice summary and incorrect support material consumption statistics.
(https://github.com/bambulab/BambuStudio/issues/4864 ,https://github.com/bambulab/BambuStudio/issues/4873 ,https://github.com/bambulab/BambuStudio/issues/4879 ,https://github.com/bambulab/BambuStudio/issues/4906 ,https://github.com/bambulab/BambuStudio/issues/4911 ,https://github.com/bambulab/BambuStudio/issues/4922 ,https://github.com/bambulab/BambuStudio/issues/4925 ,https://github.com/bambulab/BambuStudio/issues/4946 ,https://github.com/bambulab/BambuStudio/issues/4976)
- Fixed an issue where the top slice colors were incorrect on some models.
(https://github.com/bambulab/BambuStudio/issues/4870)
- Fixed a selection bug where the color module interface overlapped with the object.
(https://github.com/bambulab/BambuStudio/issues/4871)
- Fixed an issue with Z-axis scaling errors.
(https://github.com/bambulab/BambuStudio/issues/4747)
- Fixed fly lines issues in some slices.
(https://github.com/bambulab/BambuStudio/issues/4876
https://github.com/bambulab/BambuStudio/issues/4962
https://github.com/bambulab/BambuStudio/issues/4742
https://github.com/bambulab/BambuStudio/issues/4056
https://github.com/bambulab/BambuStudio/issues/2484)
- Fixed crashes caused by issues in certain slices.
(https://github.com/bambulab/BambuStudio/issues/4898)
- Fixed an issue where Fuzzy Skin generated vertical, regular patterns.
(https://github.com/bambulab/BambuStudio/issues/4746 ,https://github.com/bambulab/BambuStudio/issues/4825)
- Fixed an issue with incorrect recognition of Support for ABS.
(https://github.com/bambulab/BambuStudio/issues/4900)
- Moved the "Initial Layer Density" parameter from the "Raft" section to the "Advance" tab.
(https://github.com/bambulab/BambuStudio/issues/4773)
- Fixed an issue with incorrect build plate texture images.
(https://github.com/bambulab/BambuStudio/issues/5029)
- Fixed an issue where slicing certain multi-color models caused a crash.
(https://github.com/bambulab/BambuStudio/issues/5037)
- Fixed an issue where the color change behavior was incorrect when the printer skipped multi-color print objects.
(https://github.com/bambulab/BambuStudio/issues/4940 ,https://github.com/bambulab/BambuStudio/issues/4501)
- Fixed an error where Brim Ears were not duplicated when duplicating objects.
(https://github.com/bambulab/BambuStudio/issues/5048)
- Added variables to resolve build errors in Linux Flatpak environments.
(https://github.com/bambulab/BambuStudio/issues/5008)
- Fixed a checkbox display issue on startup in Linux systems.
(https://github.com/bambulab/BambuStudio/issues/2711)
- Resolved an issue where print time was not displayed.
(https://github.com/bambulab/BambuStudio/issues/5028)
- Fixed an error where the target temperature was not displayed correctly on the device page after starting a print.
(https://github.com/bambulab/BambuStudio/issues/5018)
- Resolved errors in auto-orientation at specific angles.
(https://github.com/bambulab/BambuStudio/issues/5092)
- Fixed a potential collision issue when printing items ’By-Object‘.
(https://github.com/bambulab/BambuStudio/issues/4804)
- Corrected an issue where navigating to specific layers could fail.
(https://github.com/bambulab/BambuStudio/issues/4957
,https://github.com/bambulab/BambuStudio/issues/5170 )
- Addressed a crash issue when connecting in cross-subnet mode.
(https://github.com/bambulab/BambuStudio/issues/5135)
- Fixed synchronization problems with the AMS in certain cases.
(https://github.com/bambulab/BambuStudio/issues/5181
,https://github.com/bambulab/BambuStudio/issues/4863
,https://github.com/bambulab/BambuStudio/issues/4949)
