The article Attach and group introduces the role of the attach tool. It can bind different patterns to maintain their relative positions and place them on the same plate for processing. However, the tool is not completely free to bind. Due to the possibility of different objects having different processing types and hardware limitations, some specific processes cannot be bound to the same plate for processing ->
When binding objects that are not supported to be made on the same plate together, an exclamation mark will appear in the object list of the software. After clicking it, you can view the details.
On the premise that the material supports the related process type, the composability of the H2D printer for different process objects produced on the same plate is shown in the table below. A slash represents duplicate content, so leave it blank.
| Process type\Process type | Laser line | Laser cut | Laser fill/Laser image | Basic cut | Drawing line/Drawing fill | Print then cut |
|---|---|---|---|---|---|---|
| Laser line | \ | Yes, use the laser platform | Yes, use the laser platform | Yes, use the cutting platform for processing, and the laser power should not be too high. Only support laser engraving on the surface but cannot cut through the material, otherwise it will damage the platform | Yes, use the cutting platform for processing, and the laser power should not be too high. Only support laser engraving on the surface but cannot cut through the material, otherwise it will damage the platform | No |
| Laser cut | \ | \ | Yes, use the laser platform | No | No | No |
| Laser fill/Laser image | \ | \ | \ | Yes, use the cutting platform for processing, and the laser power should not be too high. Only support laser engraving on the surface but cannot cut through the material, otherwise it will damage the platform | Yes, use the cutting platform for processing, and the laser power should not be too high. Only support laser engraving on the surface but cannot cut through the material, otherwise it will damage the platform | No |
| Basic cut | \ | \ | \ | \ | Yes, use the cutting platform | Yes, use the cutting platform |
| Drawing line/Drawing fill | \ | \ | \ | \ | \ | Yes, use the cutting platform |
| Print then cut | \ | \ | \ | \ | \ | \ |