¶ What it is
HMS_0700-2000-0002-0001: AMS1 Slot1 filament has run out.
This warning appears when the filament is used up in one of the slots during printing, i.e. the filament detection switch of the extruder detects that there is no filament left. You can refer to this wiki about the working principle of the filament detection switch of the extruder: HMS_0700_2000_0002_0004: The AMS slot1's filament may be broken in the tool head | Bambu Lab Wiki
¶ Safety warning and Machine state before starting operation
¶ Operation guide
¶ Step1
If you see that the spool's filament in the slot runs out, please insert the required filament and press the “Retry” button on the screen/APP/Slicer to continue.
¶ Step2
If the message still shows up, please contact the after-sales team.
¶ Error message:
“AMS[n] Slot[x] filament has run out. Please insert a new filament.” (n=1,2,3,4 corresponding to 4 AMS，x indicates the number of slots).
The error codes below share the same issue as this one:
HMS_0700_2000_0002_0001 AMS1 Slot1 filament has run out. Please insert a new filament.
HMS_0700_2100_0002_0001 AMS1 Slot2 filament has run out. Please insert a new filament.
HMS_0700_2200_0002_0001 AMS1 Slot3 filament has run out. Please insert a new filament.
HMS_0700_2300_0002_0001 AMS1 Slot4 filament has run out. Please insert a new filament.
0700-2000-0002-0001
0700-2100-0002-0001
0700-2200-0002-0001
0700-2300-0002-0001
0701-2000-0002-0001
0701-2100-0002-0001
0701-2200-0002-0001
0701-2300-0002-0001
0702-2000-0002-0001
0702-2100-0002-0001
0702-2200-0002-0001
0702-2300-0002-0001
0703-2000-0002-0001
0703-2100-0002-0001
0703-2200-0002-0001
0703-2300-0002-0001
¶ End Notes
We hope the detailed guide provided has been helpful and informative.
To ensure a safe and effective execution, if you have any concerns or questions about the process described in this article, we recommend submitting a Technical ticket regarding your issue. Please include a picture or video illustrating the problem, as well as any additional information related to your inquiry.