¶ Observation
Printer failed to extrude the filament.
 |
 |
Possible root causes:
- Extruder clog
- Nozzle clog
¶ Troubleshooting
¶ Tools, Equipment, and Materials
Please refer to the info inside each detailed troubleshooting wiki.
¶ Actions
¶ X1/P1 Series:
Check which part is clogging by referring to this Wiki.
¶ H2 Series:
Refer to this Wiki to check whether it is an extruder jam or a nozzle clog.
If the nozzle is clogged: H2D Nozzle Clog Troubleshooting
If the extruder is jammed: H2D Extruder Disassembly and Assembly Guide
¶ Equivalent Codes
The following HMS codes represent the same type of fault on different AMSs.
0700-7000-0002-0003 AMS 1
0701-7000-0002-0003 AMS 2
0702-7000-0002-0003 AMS 3
0703-7000-0002-0003 AMS 4
¶ End Notes
We hope that the detailed guide we shared with you was helpful and informative.
We want to ensure that you can perform it safely and effectively. If you have any concerns or questions regarding the process described in this article, we encourage you to reach out to our friendly customer service team before starting the operation. Our team is always ready to help you and answer any questions you may have.
Click here to open a new ticket in our Support Page.
We will do our best to respond promptly and provide you with the assistance you need.