H2D Packaging List


H2D Laser Full Combo	H2D AMS Combo
H2D AMS 2 Pro Build Plate (Pre-installed on heatbed)	H2D AMS 2 Pro Build Plate (Pre-installed on heated)

Accessory Box 1. Cutting Module - Cutting Module - Pen Holder - Pen Height Calibrator - Pen Fixture	/
2. Emergency Stop Button & Safety Key 3. Power Cord 4. Bambu Bus Cable 6-pin 5. Marker Pen 6. Spool Holder 7. Bambu Filament Swatches	Safety Key Spool Holder Bambu Filament Swatches
8. Tool Box - 0.4mm Nozzle - Silicone Sock for Hotend - Filament Cutter - 45° Fine-point Blade - Unclogging Pin - Nozzle Wiping Pad - Nozzle Blocker - Scraper Blade - Weeding Tool - Screws for Scraper - Screws for Spool Holder - Allen Key (H1.5 & H2.0) - Laser Homing Area XY & Z Marker - Rubber Screws for Chamber Exhaust Fan - Camera Privacy Cover - Lubricant Oil - Lubricant Grease	Tool Box - 0.4mm Nozzle - Silicone Sock for Hotend - Filament Cutter - Unclogging Pin - Nozzle Wiping Pad - Nozzle Blocker - Scraper Blade - Screws for Scraper - Screws for Spool Holder - Allen Key (H1.5 & H2.0) - Camera Privacy Cover - Lubricant Oil - Lubricant Grease
PTFE Tube Desiccant	PTFE Tube Desiccant
Quick Start Guide Warranty Leaflet Disclaimer and safety guidelines	Quick Start Guide Warranty Leaflet Disclaimer and safety guidelines
Supply Box - Laser Platform - Cutting Platform - Cutting Protection Base - StrongGrip Cutting Mat - LightGrip Cutting Mat - Laser Slats Pack - Material Pins - Basswood Plywood - Cork Sheet - Heat Transfer Vinyl - Pearlescent White Greeting Card Set - Rectangular PU Iron-on Patch - Round Stainless Steel Tag (Large & Small) - Brush	/
The followings are packaged inside AMS 2 Pro: Smoke Ventilation Pipe Ventilation Pipe Adapter Pipe Clamp Screws for Ventilation Pipe Adapter Air Pump Intake	/


Physical Picture	Descriptions
	Cutting Module Cutting Module Installation Guide Introduction to the main components and usage process of the cutting&drawing module
	Pen Holder & Pen Height Calibrator Introduction to the main components and usage process of the cutting&drawing module
	Pen Fixture Introduction to the main components and usage process of the cutting&drawing module
	0.4mm Nozzle Replace Hotend
	Filament Cutter Replace H2D Filament Cutter Lever and Blade
	45° Fine-point Blade
	Unclogging Pin, can be used to unclog hotend H2D Hotend Unclogging Procedure
	Nozzle Wiping Pad
	Nozzle Blocker Repair and Replace H2D Flow Blocker
	Scraper Blade Cutting Module Assist Tool (weeding tool, scraper and roller) Usage Introduction
	Weeding Tool Cutting Module Assist Tool (weeding tool, scraper and roller) Usage Introduction
	Screws for Spool Holder
	Screws for Scraper
	Allen Key (H1.5 & H2.0)
	Laser Homing Area XY & Z Marker
	Rubber Screws for Chamber Exhaust Fan Replace H2D Chamber Exhaust Fan
	Camera Privacy Cover
	Lubricant Oil, typically used for the lubrication of linear guides, slide rails, and steel shafts
	Lubricant Grease, used for lubricating lead screws or eliminating noise issues between belts and idler pulleys
	Emergency Stop Button & Safety Key Install the emergency stop button
	Power Cord
	Bambu Bus Cable 6-pin
	Marker Pen
	Spool Holder
	Bambu Filament Swatches A reference when you are looking for a type of filament with a certain color. Also, the 5-digit code can be used to quickly locate the filament in our store.
	Laser Platform Introduction to the Laser Platform Install the laser platform Introduction to the main components and workflow of the laser module
	Cutting Platform Introduction to the Cutting Platform Cutting Protection Base StrongGrip Cutting Mat LightGrip Cutting Mat
	Laser Slats Pack Install the laser platform
	Material Pins Material pins can be used to crimp the materials, which can make the materials flat and not easy to move. The method of use is to magnetically absorb it into the vertical edges on both sides of the laser platform, and crimp it to the edge of the materials with the inclined surface facing down
	Basswood Plywood
	Cork Sheet
	Heat Transfer Vinyl
	Pearlescent White Greeting Card Set
	Rectangular PU Iron-on Patch
	Round Stainless Steel Tag (Large & Small)
	Brush
	Smoke Ventilation Pipe Install Smoke Ventilation Pipe
	Ventilation Pipe Adapter Install Smoke Ventilation Pipe
	Pipe Clamp Install Smoke Ventilation Pipe
	Screws for Ventilation Pipe Adapter Install Smoke Ventilation Pipe
	Air Pump Intake Install Air Pump Intake
	PTFE Tube
	Desiccant, placed inside the AMS to keep the air inside dry, thus protecting the filaments from moisture

¶ Packing list

¶ End Notes